HWA PURE UV50 1.4 - 14kg

HWA PURE UV50 1.4 – 14kg

39.00 259.00  1119 s DPH

  • Filling gaps and holes in the wood of various objects, etc.
  • Casting of thick castings up to 10 cm
  • Made for epoxy glass laminates
  • Creating mirror 3D coatings
Clear
SKU: N/A Categories: ,

Description

HWA PURE UV

  • 1.4kg (resin + hardener = A + B = 1kg + 0.4kg)
  • 5.6kg (resin + hardener = A + B = 4kg + 1.6kg)
  • 14kg (resin + hardener = A + B = 10kg + 4kg)

CHARACTERISTICS

  • high UV resistance
  • high pourability
  • easily ventilated
  • excellent adhesion to various substrates
  • low viscosity
  • high transparency
  • chemical and mechanical resistance
  • simple application
  • very low temperature rise during application
  • small linear shrinkage

PURPOSE

  • Watering gaps in wood, various objects, etc.
  • Casting of coarse castings up to 5cm
  • For the production of epoxy glass laminates

 

The materials to be used should have an optimum temperature of 20-25 °C. The ideal temperature of the unmixed components A and B is 20-25 °C, then the viscosity is the lowest, so the bubbles evaporate the fastest. In a clean container, mix component A with component B in the ratio A: B – 100: 40. Stir slowly with a stirrer for about 3-7 min. (To prevent excessive aeration of the material, it is recommended to use a turbine or basket stirrer at a speed of approximately 300-400 rpm.) You can then pour into the mold. Due to the ongoing chemical reaction, it is necessary to apply the material after mixing, do not leave the mixed material in the package. The optimal ambient temperature is 20 °C, at which a gel consistency occurs after 36-48h. With ideal parameters, it can be processed after 5-7 days.

 

TECHNICAL SHEET

 

Additional information

Weight N/A
Hmotnosť

1.4kg, 14kg, 5.6kg

VÝSLEDNÁ hodnota je v KG
* doporučujeme použiť 10%-20% rezervu

Cart
  • No products in the cart.