HWA PURE UV 1.4 - 14kg

HWA PURE UV 1.4 – 14kg

42.00 319.00  s DPH

  • Filling gaps and holes in the wood of various objects, etc.
  • Casting of thick castings up to 10 cm
  • Made for epoxy glass laminates
  • Creating mirror 3D coatings
SKU: 003 Categories: ,



  • 1.4kg (resin + hardener = A + B = 1kg + 0.4kg)
  • 7kg (resin + hardener = A + B = 5kg + 2kg)
  • 14kg (resin + hardener = A + B = 10kg + 4kg)


  • high UV resistance
  • high pourability
  • easily ventilated
  • excellent adhesion to various substrates
  • low viscosity
  • high transparency
  • chemical and mechanical resistance
  • simple application
  • very low temperature rise during application
  • small linear shrinkage


  • Watering gaps in wood, various objects, etc.
  • Casting of coarse castings up to 10 cm
  • For the production of epoxy glass laminates


The materials to be used should have an optimum temperature of 20-25 °C. The ideal temperature of the unmixed components A and B is 20-25 °C, then the viscosity is the lowest, so the bubbles evaporate the fastest. In a clean container, mix component A with component B in the ratio A: B – 100: 40. Stir slowly with a stirrer for about 3-7 min. (To prevent excessive aeration of the material, it is recommended to use a turbine or basket stirrer at a speed of approximately 300-400 rpm.) You can then pour into the mold. Due to the ongoing chemical reaction, it is necessary to apply the material after mixing, do not leave the mixed material in the package. The optimal ambient temperature is 20 °C, at which a gel consistency occurs after 36-48h. With ideal parameters, it can be processed after 5-7 days.




Additional information

Weight 14 kg

1.4kg, 14kg, 7kg


There are no reviews yet.

Be the first to review “HWA PURE UV 1.4 – 14kg”

Your email address will not be published. Required fields are marked *

VÝSLEDNÁ hodnota je v KG
* doporučujeme použiť 10%-20% rezervu

  • No products in the cart.