Description
HWA NANO
- 1.5kg (resin + hardener = A + B = 1kg + 0.5kg)
- 6kg (resin + hardener = A + B = 4kg + 2kg)
CHARACTERISTICS
- Excellent adhesion to various substrates
- Low viscosity
- High transparency
- Simple application
- Good penetration of concrete substrates
- A product with a wide range of uses
PURPOSE
- Penetration and impregnation of wood, concrete and other materials
- Used for making the epoxy glass laminates
- Creating mirror 3D coatings
- Not suitable for pouring
Materials intended for use should have a temperature of min. 25-30 ° C. The ideal temperature of the unmixed components A and B is 25-35 ° C, then the viscosity is the lowest, so the bubbles evaporate the fastest. In a clean container, mix component A with component B in the ratio A: B – 100: 50. Stir slowly with a stirrer for about 3-5 min. (To prevent excessive aeration of the material, it is recommended to use a turbine stirrer at a speed of approximately 300-400 rpm.) Due to the ongoing chemical reaction, the material should be applied immediately after mixing as it begins to solidify. Do not leave mixed material in the package.